needhelp!
01-12 03:15 PM
Hospital only drawback is that its close to impossible to have a completely unmedicated birth. Take their free tour, its fun to see a different perspective and hear how they do things.
thanks for the info.
I am little hesitant about this, I mean house like setting with midwifes. my wife is little bit uncomfortable.
I am looking for options where I can get a payment plan from hospital.
I have called few hospiltals and doctors. will post will more details once I finalize.
Thank you very much!
thanks for the info.
I am little hesitant about this, I mean house like setting with midwifes. my wife is little bit uncomfortable.
I am looking for options where I can get a payment plan from hospital.
I have called few hospiltals and doctors. will post will more details once I finalize.
Thank you very much!
wallpaper White Horse By Taylor Swift
psaxena
05-20 05:37 PM
There should a seperate quota for immigrants from Jhumri Talliya
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
GCOP
04-20 12:40 PM
Friends,
The previous post has a very good draft, but in addition, we should add recapture of unused visas. Let's hope for the best. Thanks
The previous post has a very good draft, but in addition, we should add recapture of unused visas. Let's hope for the best. Thanks
2011 Taylor Swift#39;s Fearless album
Sheila Danzig
02-25 01:52 PM
I see this all the time. An RFE for one thing (usually like yours - accreditation of the PGD or Masters degree) and then a denial based on the 3 year bachelor's. I tell clients to cover the bachelor's degree when they get the first RFE.
With regards to the Masters equivalency - USCIS has objected to the Masters if preceded by a 3 year bachelor's degree. However, properly evaluated with reference to an unpublished AAO decision (not legally binding on its own but very powerful) we have seen these cases approved.
The link to the AAO decision for the 3+1 being equivalent to a US bachelor's degree is NOT relevant. In that case the 1 year bachelor in education required the 3 year bachelor for admission so it was not considered combining. Much like an associates degree is required for admission to a bachelor's degree so that is not combining. (We use that theory when working with a 2 year bach + 2 year masters, generally from PK).
If you want I can review the case for you at www.cciFree.com - you can file an MTR. And if you end up in the appeals office the previous AAO decision should hold up there.
Here is the link:
http://www.murthy.com/news/n_combdg.html
Why the heck is USCIS bothered about your bachelors when your Labor clearly says Masters required? I think you have a strong case since the RFE did not mention anything about your bachelors. What is your attorney saying? why didnt your ed evaluator mention anything about your bachelors? Will it help if you could evalute your qualifications from another agency, wherein they could prove that you had enough credits and class hours in your bachelors to be equal to US 4 yr courses?
I am sure there are many helpful folks on this forum who could also guide you on your case. They may have had first hand experience in such situations. Do keep us posted.
Good luck!
With regards to the Masters equivalency - USCIS has objected to the Masters if preceded by a 3 year bachelor's degree. However, properly evaluated with reference to an unpublished AAO decision (not legally binding on its own but very powerful) we have seen these cases approved.
The link to the AAO decision for the 3+1 being equivalent to a US bachelor's degree is NOT relevant. In that case the 1 year bachelor in education required the 3 year bachelor for admission so it was not considered combining. Much like an associates degree is required for admission to a bachelor's degree so that is not combining. (We use that theory when working with a 2 year bach + 2 year masters, generally from PK).
If you want I can review the case for you at www.cciFree.com - you can file an MTR. And if you end up in the appeals office the previous AAO decision should hold up there.
Here is the link:
http://www.murthy.com/news/n_combdg.html
Why the heck is USCIS bothered about your bachelors when your Labor clearly says Masters required? I think you have a strong case since the RFE did not mention anything about your bachelors. What is your attorney saying? why didnt your ed evaluator mention anything about your bachelors? Will it help if you could evalute your qualifications from another agency, wherein they could prove that you had enough credits and class hours in your bachelors to be equal to US 4 yr courses?
I am sure there are many helpful folks on this forum who could also guide you on your case. They may have had first hand experience in such situations. Do keep us posted.
Good luck!
more...
vrbest
10-08 01:18 PM
Got EAD Card for all of us in a span of 3-5 days. My son got 1 year EAD (10yrs old) but me and my wife got 2 years EAD. Any way happy that I can claim 300$ tax rebate for my son and get SSN for him also..
Still pending... Just checking to see if there are many waiting like me
NSC: July 3nd 2008
FP : Aug 1, 2008
LUD on AUG 3, 2008
Still pending approval..
What a weird system - even for E-Filing (supposed to be online system- easy to organize), we see random approvals. Hope someone realizes and makes the system organized better...
Still pending... Just checking to see if there are many waiting like me
NSC: July 3nd 2008
FP : Aug 1, 2008
LUD on AUG 3, 2008
Still pending approval..
What a weird system - even for E-Filing (supposed to be online system- easy to organize), we see random approvals. Hope someone realizes and makes the system organized better...
alterego
09-14 04:28 PM
I couldn't agree with you more...
As long as you are able to do what you want to do in life, that is what really matters. I don't have children yet, so that's not my worry. My spouse is on her own H1 and I hold two jobs on concurrent H1s.
Between the 3 jobs, we make good money, own two houses in the US, one overseas and live a content life. That's our GC, the actual GC is nice to have but it doesn't bother us that much...I bet there are plenty of GC holders out there who haven't gotten as far as I have...in terms of working 2 jobs & owning 2 houses.
So the moral of the story is, GC or no GC, live a good life, be content and don't miss out on the fun...don't let the GC fever bring you down..
If the hosung markets turned down like the NASDAQ 5 yrs ago, and brought down the whole economy with it, then as a result of the ensuing economic recession you lost one, two or all 3 of your jobs and ended up in negative equity, could not find a new job sponsoring H1b due to the deep recession and your greencard is nowhere in the near future. Would you still feel as secure and happy? I am not sure what country you are from, but would you make a salary close to what you are making here?
Security my friend, thats what a green card brings. I applaud you on your courage and bravery in just taking a chance and doing all these things, you will likely be fine and get your green card eventually but taking risks can bring consequences as well. Many people are more risk averse than you.
As long as you are able to do what you want to do in life, that is what really matters. I don't have children yet, so that's not my worry. My spouse is on her own H1 and I hold two jobs on concurrent H1s.
Between the 3 jobs, we make good money, own two houses in the US, one overseas and live a content life. That's our GC, the actual GC is nice to have but it doesn't bother us that much...I bet there are plenty of GC holders out there who haven't gotten as far as I have...in terms of working 2 jobs & owning 2 houses.
So the moral of the story is, GC or no GC, live a good life, be content and don't miss out on the fun...don't let the GC fever bring you down..
If the hosung markets turned down like the NASDAQ 5 yrs ago, and brought down the whole economy with it, then as a result of the ensuing economic recession you lost one, two or all 3 of your jobs and ended up in negative equity, could not find a new job sponsoring H1b due to the deep recession and your greencard is nowhere in the near future. Would you still feel as secure and happy? I am not sure what country you are from, but would you make a salary close to what you are making here?
Security my friend, thats what a green card brings. I applaud you on your courage and bravery in just taking a chance and doing all these things, you will likely be fine and get your green card eventually but taking risks can bring consequences as well. Many people are more risk averse than you.
more...
avi101
04-03 10:53 AM
Faxed.
2010 White Horse
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
more...
axp817
04-09 02:57 PM
Receipting is not done by VO and the staff who do receipting follow certain procedures.
USCIS mailroom has certain protocols and thats why even our AC21 documentation does not reach file.
Files are distributed to different officers and they work on the files.
Without a receipt number you cannot track your MTR.
Talk to a very good Attorney on further course of action.
I filed MTR - my 485 was denied because the officer ignored the AC21 job change. When I called customer service and explained - I was transferred to a VO and when I explained it, she requested me to file an appeal so that I don't have to pay instead f MTR.
When I talked to Attorney - she said "Don't do that - when your MTR gets receipted, you can track it but cannot track an appeal"
Remember MTR = if USCIS makes a mistake - MTR costs $$
Appeal = if you want AAO to consider various factors on a correctly interpreted denial and appeal to see if you can convince.
Does this mean that an MTR filed without the filing fee is automatically considered an appeal?
USCIS mailroom has certain protocols and thats why even our AC21 documentation does not reach file.
Files are distributed to different officers and they work on the files.
Without a receipt number you cannot track your MTR.
Talk to a very good Attorney on further course of action.
I filed MTR - my 485 was denied because the officer ignored the AC21 job change. When I called customer service and explained - I was transferred to a VO and when I explained it, she requested me to file an appeal so that I don't have to pay instead f MTR.
When I talked to Attorney - she said "Don't do that - when your MTR gets receipted, you can track it but cannot track an appeal"
Remember MTR = if USCIS makes a mistake - MTR costs $$
Appeal = if you want AAO to consider various factors on a correctly interpreted denial and appeal to see if you can convince.
Does this mean that an MTR filed without the filing fee is automatically considered an appeal?
hair appearances Taylor Swift
letstalklc
11-03 11:13 AM
EB2 I will remain same
EB3 I will move little bit...
Hoping for the Jan bulletin if at all any qurterly spillover.....
some one from Immigration Voice should get the info USCIS regarding thequrterly spillover.
EB3 I will move little bit...
Hoping for the Jan bulletin if at all any qurterly spillover.....
some one from Immigration Voice should get the info USCIS regarding thequrterly spillover.
more...
eilsoe
02-05 12:56 AM
right :)
hot Taylor Swift - White Horse
sureshksv
04-01 05:48 PM
faxes no 10 and 11 sent
more...
house and Taylor Swift#39;s song,
gc_on_demand
06-12 10:00 AM
The bill goes no where after the hearings unless there are enough co-sponsors and CHC members are ok with the bills. Then the house speaker will decide to let the bills be debated and voted on the house floor. If it goes through House then Senate will vote on it and then the Prez signs it off.
So the most important thing is to participate in the phone campaign esp the one targeting CHC members.
I think bottom line is MAKE CALL ASAP . MORE YOU CALL MORE CHANCES WE HAVE..
So the most important thing is to participate in the phone campaign esp the one targeting CHC members.
I think bottom line is MAKE CALL ASAP . MORE YOU CALL MORE CHANCES WE HAVE..
tattoo Above is Taylor Swift on the
Student with no hopes
04-23 11:04 AM
You say all these because you understand. Most of these police officers out there (and even Immigration Enforcement officers) dont understand the laws they are enforcing. I once asked an american embassy consular officer during an H1B renewal interview how long I had to stay in the US if I get laid off from my job. She smiled and said she doesnt know. Ironic right? That is US Immigration laws for you. So complex yet so unreasonable.
Arrived F1: Dec. 2001
H1-B: May 2005
Labor Applied: No
I-140 Applied: No
I-485 Applied: No
Laid off: April 2009
Departed USA: May 2009
You left US?
Arrived F1: Dec. 2001
H1-B: May 2005
Labor Applied: No
I-140 Applied: No
I-485 Applied: No
Laid off: April 2009
Departed USA: May 2009
You left US?
more...
pictures White Horse by Taylor
wellwishergc
04-10 09:15 PM
I understand!!! I was just kidding..:); I will call it a night.. It was a pleasure talking to you..
Bye for now..
Ah, but that was the private sector -- not head bashing against slow governmental bureaucracy. You'd be surprised to know what is going on with MS's current efforts on these matters.
Bye for now..
Ah, but that was the private sector -- not head bashing against slow governmental bureaucracy. You'd be surprised to know what is going on with MS's current efforts on these matters.
dresses Taylor Swift -White Horse
nrk
11-04 06:11 PM
Hi,
It is the same agent id for all of us.
I got my infopass with in 3 days. You don't need an attorneys presence in info pass.
If you go there with 2 forms of id , plus the 485 notices that is fine.
Things to ask
1. back ground check is cleared or not
2. pre adjudicated
3. Is there any other thing holding up your case.
Probably we have to give a complaint against the agent id, what ever the cases went up him he is giving the same message.
It is the same agent id for all of us.
I got my infopass with in 3 days. You don't need an attorneys presence in info pass.
If you go there with 2 forms of id , plus the 485 notices that is fine.
Things to ask
1. back ground check is cleared or not
2. pre adjudicated
3. Is there any other thing holding up your case.
Probably we have to give a complaint against the agent id, what ever the cases went up him he is giving the same message.
more...
makeup Feedback for White Horse
Gravitation
04-13 11:18 AM
http://www.travel.state.gov/visa/frvi/bulletin/bulletin_3219.html
girlfriend quot;White Horsequot;
![taylor swift white horse album. White Horse Cover [FULL] by Taylor Swift. 3:38. So i finally did it.](http://i.ytimg.com/vi/KiQZDMm7tt8/0.jpg "White Horse Cover [FULL] by Taylor Swift. 3:38. So i finally did it.")
ash0210
12-04 05:37 PM
Wow!!! if its so then its good!!!
As per new SSN statement, I have around 80K in SSN and around same equal amount of Medicare money and wondering if we can take back home SSN money, what will happen to our Medicare money?
Any News regarding Medicare money? can we take advantage of Medicare money in our country?
If you move back to India permanently, you can take you social security money with you.
As per new SSN statement, I have around 80K in SSN and around same equal amount of Medicare money and wondering if we can take back home SSN money, what will happen to our Medicare money?
Any News regarding Medicare money? can we take advantage of Medicare money in our country?
If you move back to India permanently, you can take you social security money with you.
hairstyles for “White Horse”.Swift#39;s
go_guy123
06-24 12:23 PM
No way CIR or any form of amnesty for illegal will happen in the next few year.
Immigration is one thing where majority of Americans are united in controlling illegal population.
It can pass Senate but House it will never pass.
Moment CIR comes up, the right wing will arouse the masses. House members focus on more
local issues and in many districts people don't want illegal amnesty or CIR. They want a crackdown.
Democratic members in the House will never pass CIR against a Republican opposition otherwise they will pay a heavy price in the election.
In fact democratic party was able to get the house by selecting conservation candidates in the
conservative districts. That is was the Howard dean/Rahm Emanuel strategy. Select candidates who can win rather than candidates who are steadfast with core democratic party principles.
Thus you have democratic party members like Jim Webb who are ardent supporters of the NRA
(pro guns) in a state like Virginia.
Lamar Smith, Zoe Lofgren, Xavier Becerra,Howard Berman, Lincoln D�az-Balart, Luis Guti�rrez, Nydia Vel�zquez,
Adam Putnam, Anthony Weiner.....all run in Hispanic leaning districts and therefore want CIR. But Congress members
from other districts cant support this.
Senators support doent matter much because in the past (2006), it did pass the Senate but it dropped dead in the
Congress.
Immigration is one thing where majority of Americans are united in controlling illegal population.
It can pass Senate but House it will never pass.
Moment CIR comes up, the right wing will arouse the masses. House members focus on more
local issues and in many districts people don't want illegal amnesty or CIR. They want a crackdown.
Democratic members in the House will never pass CIR against a Republican opposition otherwise they will pay a heavy price in the election.
In fact democratic party was able to get the house by selecting conservation candidates in the
conservative districts. That is was the Howard dean/Rahm Emanuel strategy. Select candidates who can win rather than candidates who are steadfast with core democratic party principles.
Thus you have democratic party members like Jim Webb who are ardent supporters of the NRA
(pro guns) in a state like Virginia.
Lamar Smith, Zoe Lofgren, Xavier Becerra,Howard Berman, Lincoln D�az-Balart, Luis Guti�rrez, Nydia Vel�zquez,
Adam Putnam, Anthony Weiner.....all run in Hispanic leaning districts and therefore want CIR. But Congress members
from other districts cant support this.
Senators support doent matter much because in the past (2006), it did pass the Senate but it dropped dead in the
Congress.
sanju
10-21 10:14 PM
suresh.emails,
I said in my earlier post that I will think about it. This is what I have to say.
There are things that can be measured in single dimension say on x-axis. Say you have to buy a car and you have to ask yourself a question – which car do I like to buy? Say you like Honda as compared to other cars. Your likeability of Honda or such cars could be measured on the positive side of the x-axis and likewise, if you don’t like some car, that can be measured on the negative side on the x-axis. Now, there could be another dimension to the situation, say, what is the car model in question, if it is a civic or maybe accord, accord, CRV, Odyssey, Element or whatever. Now if you ask yourself that question again – which car do I like? This time you need two dimensions to answer the question which Honda model you like and which you don’t like. Foe the sake of clarity you can do this on the X&Y-axis. But say if there is a choice of multiple colors. You would have to now think/plot a 3-dimention model, say a cube, because you may like a model of Honda in one color but you may not like the same color in another model. Now there could be other combinations, say which year make or whether it is a sedan/coupe or the cost factor or resale value, mileage, new/old, dealership, goodies, experience of your friends/well-wishers etc. etc. etc. So there could be multiple dimensions analysis to answer a 7 word question - which car do I like to buy?
The reason I say this is, even situations which otherwise seem simple require multiple dimensions of analysis. And there could be many more dimensions that we do not know or we do not understand. But say, you ignore all dimensions to every situation, and judge every situation in a single dimension analysis - whether or not you like something or not? If you don’t like it, that something has to be wrong. If you like it, that something is right. It can be easily identified on the x-axis. Simple, isn’t it. Life would be so much easier; it would be so much fun.
But here is the problem. With single dimension analysis of every situation, we will all be wrong most of the time. Since our childhood, maybe that’s why we were sent to school to get educated so that we could gain the knowledge & wisdom which could help us to apply more than one dimension to every situation and we could gain the ability to evaluate and analyze things around us “intelligently” – in multi-dimension.
Your single dimension analysis of -ve comments situation is, you don't like them and that's why the entire system HAS to be wrong. You see what I am saying.
It’s ok to express in the any forum and if you don’t like a forum, as in this case you don’t like reputation system, you have the choice to totally ignore it and not look at it at all. But you chose to look at the reputation system maybe because you continue to be mindful of your reputation on the anonymous forum, but then you continue to complain about the existense of the red dot system. It’s the choice you make. And then you apply single dimension analysis – if you don’t like a comment, there is something wrong with the guy who posted a negative comment and the reputation system and the IV and everyone around us. And because you are not happy, you think it is ok to curse everyone saying that the entire immigration system cannot be fixed because IV has reputation system. You know, I have to tell you, you are pretty good.
The reason I say all this is, I have fundamental difference with the folks who do not like reputation system but continue to look at it and complain about it, even when they have the choice not to look at the reputation system. The problem doesn’t end there. Every week there is someone complaining about the reputations left for that guy, and I just have an intellectual disagreement with that behavior. And I do not have anything against you or anyone else, I am sure you are a good man with a kind heart.
.
I said in my earlier post that I will think about it. This is what I have to say.
There are things that can be measured in single dimension say on x-axis. Say you have to buy a car and you have to ask yourself a question – which car do I like to buy? Say you like Honda as compared to other cars. Your likeability of Honda or such cars could be measured on the positive side of the x-axis and likewise, if you don’t like some car, that can be measured on the negative side on the x-axis. Now, there could be another dimension to the situation, say, what is the car model in question, if it is a civic or maybe accord, accord, CRV, Odyssey, Element or whatever. Now if you ask yourself that question again – which car do I like? This time you need two dimensions to answer the question which Honda model you like and which you don’t like. Foe the sake of clarity you can do this on the X&Y-axis. But say if there is a choice of multiple colors. You would have to now think/plot a 3-dimention model, say a cube, because you may like a model of Honda in one color but you may not like the same color in another model. Now there could be other combinations, say which year make or whether it is a sedan/coupe or the cost factor or resale value, mileage, new/old, dealership, goodies, experience of your friends/well-wishers etc. etc. etc. So there could be multiple dimensions analysis to answer a 7 word question - which car do I like to buy?
The reason I say this is, even situations which otherwise seem simple require multiple dimensions of analysis. And there could be many more dimensions that we do not know or we do not understand. But say, you ignore all dimensions to every situation, and judge every situation in a single dimension analysis - whether or not you like something or not? If you don’t like it, that something has to be wrong. If you like it, that something is right. It can be easily identified on the x-axis. Simple, isn’t it. Life would be so much easier; it would be so much fun.
But here is the problem. With single dimension analysis of every situation, we will all be wrong most of the time. Since our childhood, maybe that’s why we were sent to school to get educated so that we could gain the knowledge & wisdom which could help us to apply more than one dimension to every situation and we could gain the ability to evaluate and analyze things around us “intelligently” – in multi-dimension.
Your single dimension analysis of -ve comments situation is, you don't like them and that's why the entire system HAS to be wrong. You see what I am saying.
It’s ok to express in the any forum and if you don’t like a forum, as in this case you don’t like reputation system, you have the choice to totally ignore it and not look at it at all. But you chose to look at the reputation system maybe because you continue to be mindful of your reputation on the anonymous forum, but then you continue to complain about the existense of the red dot system. It’s the choice you make. And then you apply single dimension analysis – if you don’t like a comment, there is something wrong with the guy who posted a negative comment and the reputation system and the IV and everyone around us. And because you are not happy, you think it is ok to curse everyone saying that the entire immigration system cannot be fixed because IV has reputation system. You know, I have to tell you, you are pretty good.
The reason I say all this is, I have fundamental difference with the folks who do not like reputation system but continue to look at it and complain about it, even when they have the choice not to look at the reputation system. The problem doesn’t end there. Every week there is someone complaining about the reputations left for that guy, and I just have an intellectual disagreement with that behavior. And I do not have anything against you or anyone else, I am sure you are a good man with a kind heart.
.
saggi13
02-17 09:56 PM
labor was perm
----
dont know for sure but i think my I140 was mar 07 and was approved may 2007
will check the dates and will confirm...
----
Case received at Texas Service Center - july 2nd 2007. (monday of the big chaos)...had mailed the case on Sat(before chaotic monday) thru DHL overnight
Case transfered to NBC - Dec 2nd 2007 (me & spouse)
Case status changed to interview - Dec 4th 2007 (me & spouse)
Preliminary process complete USPS mail - Dec 4th 2007 (me & spouse)
Case pending at the USCIS office transferred to email - 02/12/2009 (me & spouse)
RFE - 02/13/2009 (me & spouse)
Soft LUD - 02/17/2009 <------ (me & spouse) (here is where i think the RFE notices are being printed today and will be mailed - we should probably get them by this Friday 2/20)
assumption 1 - Being that both me & spouse received RFE, i am thinking it mostly is either health records, finger prints, photo graphs, or signatures (we had g-28 to let our attorney sign on behalf of us and they (uscis) might need original signatures)
assumption 2 - Worst of all because the status changed to RFE on 2/13 and we might not get the notices till (02/20) we lose a whole week just waiting on the notices and we will have mere 3 weeks to respond back
likely fact - for whatever reason we are very few folks who are in this boat with same pattern and have to stick together to see where we will end with this
S
----
dont know for sure but i think my I140 was mar 07 and was approved may 2007
will check the dates and will confirm...
----
Case received at Texas Service Center - july 2nd 2007. (monday of the big chaos)...had mailed the case on Sat(before chaotic monday) thru DHL overnight
Case transfered to NBC - Dec 2nd 2007 (me & spouse)
Case status changed to interview - Dec 4th 2007 (me & spouse)
Preliminary process complete USPS mail - Dec 4th 2007 (me & spouse)
Case pending at the USCIS office transferred to email - 02/12/2009 (me & spouse)
RFE - 02/13/2009 (me & spouse)
Soft LUD - 02/17/2009 <------ (me & spouse) (here is where i think the RFE notices are being printed today and will be mailed - we should probably get them by this Friday 2/20)
assumption 1 - Being that both me & spouse received RFE, i am thinking it mostly is either health records, finger prints, photo graphs, or signatures (we had g-28 to let our attorney sign on behalf of us and they (uscis) might need original signatures)
assumption 2 - Worst of all because the status changed to RFE on 2/13 and we might not get the notices till (02/20) we lose a whole week just waiting on the notices and we will have mere 3 weeks to respond back
likely fact - for whatever reason we are very few folks who are in this boat with same pattern and have to stick together to see where we will end with this
S
No comments:
Post a Comment